**Table of Contents**

This appendix lists the statistics you can gather with the **afsmonitor** program, grouping
them by category and section, and briefly describing each field, group, and section. For instructions on using the **afsmonitor** program, see Monitoring and Auditing AFS Performance

Cache Manager statistics fields are classified into the following sections and groups:

PerfStats_section - Performance Statistics Section.

PerfStats_group - Performance Statistics Group.

misc_group - Miscellaneous Group.

Server_UpDown_section - Server Up/Down Statistics Section.

FS_upDown_SC_group - File Server Up/Down Statistics in Same Cell Group.

FS_upDown_OC_group - File Server Up/Down Statistics in Other Cells Group.

VL_upDown_SC_group - VL Server Up/Down Statistics in Same Cell Group.

VL_upDown_OC_group - VL Server Up/Down Statistics in Other Cells Group.

RPCop_section - RPC Operation Measurements Section.

FS_RPCopTimes_group - File Server RPC Operation Timings Group.

FS_RPCopErrors_group - File Server RPC Operation Errors Group.

FS_RPCopBytes_group - File Server RPC Transfer Timings Group.

CM_RPCopTimes_group - Cache Manager RPC Operation Timings Group.

Auth_Access_section - Authentication and Replicated File Access Section.

Auth_Stats_group - Authentication Information for Cache Manager Group.

Access_Stats_group - Unreplicated File Access Group.

All Cache Manager variables categorized under these sections and groups names are listed below.

Performance Statistics Group (PerfStats_group)

dlocalAccesses: Number of data accesses to files within local cell.

vlocalAccesses: Number of stat accesses to files within local cell.

dremoteAccesses: Number of data accesses to files outside of local cell.

vremoteAccesses: Number of stat accesses to files outside of local cell.

cacheNumEntries: Number of cache entries.

cacheBlocksTotal: Number of (1K) blocks configured for cache.

cacheBlocksInUse: Number of cache blocks actively in use.

cacheBlocksOrig: Number of cache blocks at bootup.

cacheMaxDirtyChunks: Maximum number of dirty cache chunks tolerated.

cacheCurrDirtyChunks: Current number of dirty cache chunks.

dcacheHits: Number of data files found in local cache.

vcacheHits: Number of stat entries found in local cache.

dcacheMisses: Number of data files

**not**found in local cache.vcacheMisses: Number of stat entries

**not**found in local cache.cacheFlushes: Number of files flushed from cache.

cacheFilesReused: Number of cache files reused.

dcacheXAllocs: Additionally allocated dcaches.

vcacheXAllocs: Additionally allocated vcaches.

bufAlloced: Number of buffers allocated by AFS.

bufHits: Number of pages found on buffer cache.

bufMisses: Number of pages

**not**found on buffer cache.bufFlushDirty: Number of cached dirty buffers flushed because all were busy.

LargeBlocksActive: Number of currently used large free pool entries.

LargeBlocksAlloced: Number of allocated large free pool entries.

SmallBlocksActive: Number of currently used small free pool entries.

SmallBlocksAlloced: Number of allocated used small free pool entries.

OutStandingMemUsage: Amount of allocated memory.

OutStandingAllocs: Outstanding osi_allocs (no osi_frees yet).

CallBackAlloced: Number of callback structures allocated.

CallBackFlushes: Number of callback flush operations performed.

srvRecords: Number of servers currently on record.

srvRecordsHWM: Server record high water mark.

srvNumBuckets: Number of server hash chain buckets.

srvMaxChainLength: Maximum server hash chain length.

srvMaxChainLengthHWM: Server hash chain high water mark.

sysName_ID: Sysname ID for host hardware.

Miscellaneous Group (misc_group)

numPerfCalls: Number of performance calls received.

epoch: Cache Manager epoch time.

numCellsVisible: Number of cells we know about.

numCellsContacted: Number of cells contacted.

File Server Up/Down Statistics in Same Cell Group (FS_upDown_SC_group)

The *records* referred to in this section are the internal records kept by the **afsmonitor** program to track the processes from which data is being gathered.

fs_sc_numTtlRecords: Number of fileserver records, active or inactive.

fs_sc_numUpRecords: Number of (active) fileserver records currently marked up.

fs_sc_numDownRecords: Number of (active) fileserver records currently marked down.

fs_sc_sumOfRecordAges: Sum of fileserver record lifetimes.

fs_sc_ageOfYoungestRecord: Age of youngest fileserver record.

fs_sc_ageOfOldestRecord: Age of oldest fileserver record.

fs_sc_numDowntimeIncidents: Number of (completed) downtime incidents.

fs_sc_numRecordsNeverDown: Number of fileserver records never marked down.

fs_sc_maxDowntimesInARecord: Maximum downtimes seen by any fileserver record.

fs_sc_sumOfDowntimes: Sum of all (completed) downtimes, in seconds.

fs_sc_shortestDowntime: Shortest downtime, in seconds.

fs_sc_longestDowntime: Longest downtime, in seconds.

fs_sc_down_0_10_min: Down time incidents: 0-10 minutes.

fs_sc_down_10_30_min: Down time incidents: 10-30 minutes.

fs_sc_down_half_1_hr: Down time incidents: 30-60 minutes.

fs_sc_down_1_2_hr: Down time incidents: 1-2 hours.

fs_sc_down_2_4_hr: Down time incidents: 2-4 hours.

fs_sc_down_4_8_hr: Down time incidents: 4-8 hours.

fs_sc_down_more_8_hr: Down time incidents: more than 8 hours.

fs_sc_downDst_0: Down time incidents: 0 times.

fs_sc_downDst_1: Down time incidents: 1 time.

fs_sc_downDst_2_5: Down time incidents: 2-5 times.

fs_sc_downDst_6_10: Down time incidents: 6-10 times.

fs_sc_downDst_10_50: Down time incidents: 10-50 times.

fs_sc_downDst_more_50: Down time incidents: more than 50 times.

File Server Up/Down Statistics in Other Cells Group (FS_upDown_OC_group)

fs_oc_numTtlRecords: Number of fileserver records, active or inactive.

fs_oc_numUpRecords: Number of (active) fileserver records currently marked up.

fs_oc_numDownRecords: Number of (active) fileserver records currently marked down.

fs_oc_sumOfRecordAges: Sum of server record lifetimes.

fs_oc_ageOfYoungestRecord: Age of youngest fileserver record.

fs_oc_ageOfOldestRecord: Age of oldest fileserver record.

fs_oc_numDowntimeIncidents: Number of (completed) downtime incidents.

fs_oc_numRecordsNeverDown: Number of fileserver records never marked down.

fs_oc_maxDowntimesInARecord: Maximum downtimes seen by any fileserver.

fs_oc_sumOfDowntimes: Sum of all (completed) downtimes, in seconds.

fs_oc_shortestDowntime: Shortest downtime, in seconds.

fs_oc_longestDowntime: Longest downtime, in seconds.

fs_oc_down_0_10_min: Down time incidents: 0-10 minutes.

fs_oc_down_10_30_min: Down time incidents: 10-30 minutes.

fs_oc_down_half_1_hr: Down time incidents: 30-60 minutes.

fs_oc_down_1_2_hr: Down time incidents: 1-2 hours.

fs_oc_down_2_4_hr: Down time incidents: 2-4 hours.

fs_oc_down_4_8_hr: Down time incidents: 4-8 hours.

fs_oc_down_more_8_hr: Down time incidents: more than 8 hours.

fs_oc_downDst_0: Down time incidents: 0 times.

fs_oc_downDst_1: Down time incidents: 1 time.

fs_oc_downDst_2_5: Down time incidents: 2-5 times.

fs_oc_downDst_6_10: Down time incidents: 6-10 times.

fs_oc_downDst_10_50: Down time incidents: 10-50 times.

fs_oc_downDst_more_50: Down time incidents: more than 50 times.

VL Server Up/Down Statistics in Same Cell Group (VL_upDown_SC_group)

vl_sc_numTtlRecords: Number of vlserver records, active or inactive.

vl_sc_numUpRecords: Number of (active) vlserver records currently marked up.

vl_sc_numDownRecords: Number of (active) vlserver records currently marked down.

vl_sc_sumOfRecordAges: Sum of vlserver record lifetimes.

vl_sc_ageOfYoungestRecord: Age of youngest vlserver record.

vl_sc_ageOfOldestRecord: Age of oldest vlserver record.

vl_sc_numDowntimeIncidents: Number of (completed) downtime incidents.

vl_sc_numRecordsNeverDown: Number of vlserver records never marked down.

vl_sc_maxDowntimesInARecord: Maximum downtimes seen by any vlserver record.

vl_sc_sumOfDowntimes: Sum of all (completed) downtimes, in seconds.

vl_sc_shortestDowntime: Shortest downtime, in seconds.

vl_sc_longestDowntime: Longest downtime, in seconds.

vl_sc_down_0_10_min: Down time incidents: 0-10 minutes.

vl_sc_down_10_30_min: Down time incidents: 10-30 minutes.

vl_sc_down_half_1_hr: Down time incidents: 30-60 minutes.

vl_sc_down_1_2_hr: Down time incidents: 1-2 hours.

vl_sc_down_2_4_hr: Down time incidents: 2-4 hours.

vl_sc_down_4_8_hr: Down time incidents: 4-8 hours.

vl_sc_down_more_8_hr: Down time incidents: more than 8 hours.

vl_sc_downDst_0: Down time incidents: 0 times.

vl_sc_downDst_1: Down time incidents: 1 time.

vl_sc_downDst_2_5: Down time incidents: 2-5 times.

vl_sc_downDst_6_10: Down time incidents: 6-10 times.

vl_sc_downDst_10_50: Down time incidents: 10-50 times.

vl_sc_downDst_more_50: Down time incidents: more than 50 times.

VL Server Up/Down Statistics in Other Cells Group (VL_upDown_DC_group)

vl_oc_numTtlRecords: Number of vlserver records, active or inactive.

vl_oc_numUpRecords: Number of (active) vlserver records currently marked up.

vl_oc_numDownRecords: Number of (active) vlserver records currently marked down.

vl_oc_sumOfRecordAges: Sum of vlserver record lifetimes.

vl_oc_ageOfYoungestRecord: Age of youngest vlserver record.

vl_oc_ageOfOldestRecord: Age of oldest vlserver record.

vl_oc_numDowntimeIncidents: Number of (completed) downtime incidents.

vl_oc_numRecordsNeverDown: Number of vlserver records never marked down.

vl_oc_maxDowntimesInARecord: Maximum downtimes seen by any vlserver record.

vl_oc_sumOfDowntimes: Sum of all (completed) downtimes, in seconds.

vl_oc_shortestDowntime: Shortest downtime, in seconds.

vl_oc_longestDowntime: Longest downtime, in seconds.

vl_oc_down_0_10_min: Down time incidents: 0-10 minutes.

vl_oc_down_10_30_min: Down time incidents: 10-30 minutes.

vl_oc_down_half_1_hr: Down time incidents: 30-60 minutes.

vl_oc_down_1_2_hr: Down time incidents: 1-2 hours.

vl_oc_down_2_4_hr: Down time incidents: 2-4 hours.

vl_oc_down_4_8_hr: Down time incidents: 4-8 hours.

vl_oc_down_more_8_hr: Down time incidents: more than 8 hours.

vl_oc_downDst_0: Down time incidents: 0 times.

vl_oc_downDst_1: Down time incidents: 1 time.

vl_oc_downDst_2_5: Down time incidents: 2-5 times.

vl_oc_downDst_6_10: Down time incidents: 6-10 times.

vl_oc_downDst_10_50: Down time incidents: 10-50 times.

vl_oc_downDst_more_50: Down time incidents: more than 50 times.

File Server RPC Operation Timings Group (FS_RPCopTimes_group)

FetchData_ops: Number of FetchData operations executed.

FetchData_ops_ok: Number of successful FetchData operations.

FetchData_sum: Sum of timings for FetchData operations.

FetchData_sqr: Sum of squares of sample timings for FetchData operations.

FetchData_min: Minimum execution time observed for FetchData operations.

FetchData_max: Maximum execution time observed for FetchData operations.

FetchACL_ops: Number of FetchACL operations executed.

FetchACL_ops_ok: Number of successful FetchACL operations.

FetchACL_sum: Sum of timings for FetchACL operations.

FetchACL_sqr: Sum of squares of sample timings for FetchACL operations.

FetchACL_min: Minimum execution time observed for FetchACL operations.

FetchACL_max: Maximum execution time observed for FetchACL operations.

FetchStatus_ops: Number of FetchStatus operations executed.

FetchStatus_ops_ok: Number of successful FetchStatus operations.

FetchStatus_sum: Sum of timings for FetchStatus operations.

FetchStatus_sqr: Sum of squares of sample timings for FetchStatus operations.

FetchStatus_min: Minimum execution time observed for FetchStatus operations.

FetchStatus_max: Maximum execution time observed for FetchStatus operations.

StoreData_ops: Number of StoreData operations executed.

StoreData_ops_ok: Number of successful StoreData operations.

StoreData_sum: Sum of timings for StoreData operations.

StoreData_sqr: Sum of squares of sample timings for StoreData operations.

StoreData_min: Minimum execution time observed for StoreData operations.

StoreData_max: Maximum execution time observed for StoreData operations.

StoreACL_ops: Number of StoreACL operations executed.

StoreACL_ops_ok: Number of successful StoreACL operation.

StoreACL_sum: Sum of timings for StoreACL operations.

StoreACL_sqr: Sum of squares of sample timings for StoreACL operations.

StoreACL_min: Minimum execution time observed for StoreACL operations.

StoreACL_max: Maximum execution time observed for StoreACL operations.

StoreStatus_ops: Number of StoreStatus operations executed.

StoreStatus_ops_ok: Number of successful StoreStatus operations.

StoreStatus_sum: Sum of timings for StoreStatus operations.

StoreStatus_sqr: Sum of squares of sample timings for StoreStatus operations.

StoreStatus_min: Minimum execution time observed for StoreStatus operations.

StoreStatus_max: Maximum execution time observed for StoreStatus operations.

RemoveFile_ops: Number of RemoveFile operations executed.

RemoveFile_ops_ok: Number of successful RemoveFile operations.

RemoveFile_sum: Sum of timings for RemoveFile operations.

RemoveFile_sqr: Sum of squares of sample timings for RemoveFile operations.

RemoveFile_min: Minimum execution time observed for RemoveFile operations.

RemoveFile_max: Maximum execution time observed for RemoveFile operations.

CreateFile_ops: Number of CreateFile operations executed.

CreateFile_ops_ok: Number of successful CreateFile operations.

CreateFile_sum: Sum of timings for CreateFile operations.

CreateFile_sqr: Sum of squares of sample timings for CreateFile operations.

CreateFile_min: Minimum execution time observed for CreateFile operations.

CreateFile_max: Maximum execution time observed for CreateFile operations.

Rename_ops: Number of Rename operations executed.

Rename_ops_ok: Number of successful Rename operations.

Rename_sum: Sum of timings for Rename operations.

Rename_sqr: Sum of squares of sample timings for Rename operations.

Rename_min: Minimum execution time observed for Rename operations.

Rename_max: Maximum execution time observed for Rename operations.

Symlink_ops: Number of Symlink operations executed.

Symlink_ops_ok: Number of successful Symlink operations.

Symlink_sum: Sum of timings for Symlink operations.

Symlink_sqr: Sum of squares of sample timings for Symlink operations.

Symlink_min: Minimum execution time observed for Symlink operations.

Symlink_max: Maximum execution time observed for Symlink operations.

Link_ops: Number of Link operations executed.

Link_ops_ok: Number of successful Link operations.

Link_sum: Sum of timings for Link operations.

Link_sqr: Sum of squares of sample timings for Link operations.

Link_min: Minimum execution time observed for Link operations.

Link_max: Maximum execution time observed for Link operations.

MakeDir_ops: Number of MakeDir operations executed.

MakeDir_ops_ok: Number of successful MakeDir operations.

MakeDir_sum: Sum of timings for MakeDir operations.

MakeDir_sqr: Sum of squares of sample timings for MakeDir operations.

MakeDir_min: Minimum execution time observed for MakeDir operations.

MakeDir_max: Maximum execution time observed for MakeDir operations.

RemoveDir_ops: Number of RemoveDir operations executed.

RemoveDir_ops_ok: Number of successful RemoveDir operations.

RemoveDir_sum: Sum of timings for RemoveDir operations.

RemoveDir_sqr: Sum of squares of sample timings for RemoveDir operations.

RemoveDir_min: Minimum execution time observed for RemoveDir operations.

RemoveDir_max: Maximum execution time observed for RemoveDir operations.

SetLock_ops: Number of SetLock operations executed.

SetLock_ops_ok: Number of successful SetLock operations.

SetLock_sum: Sum of timings for SetLock operations.

SetLock_sqr: Sum of squares of sample timings for SetLock operations.

SetLock_min: Minimum execution time observed for SetLock operations.

SetLock_max: Maximum execution time observed for SetLock operations.

ExtendLock_ops: Number of ExtendLock operations executed.

ExtendLock_ops_ok: Number of successful ExtendLock operations.

ExtendLock_sum: Sum of timings for ExtendLock operations.

ExtendLock_sqr: Sum of squares of sample timings for ExtendLock operations.

ExtendLock_min: Minimum execution time observed for ExtendLock operations.

ExtendLock_max: Maximum execution time observed for ExtendLock operations.

ReleaseLock_ops: Number of ReleaseLock operations executed.

ReleaseLock_ops_ok: Number of successful ReleaseLock operations.

ReleaseLock_sum: Sum of timings for ReleaseLock operations.

ReleaseLock_sqr: Sum of squares of sample timings for StoreStatus operations.

ReleaseLock_min: Minimum execution time observed for ReleaseLock operations.

ReleaseLock_max: Maximum execution time observed for ReleaseLock operations.

GetStatistics_ops: Number of GetStatistics operations executed.

GetStatistics_ops_ok: Number of successful GetStatistics operations.

GetStatistics_sum: Sum of timings for GetStatistics operations.

GetStatistics_sqr: Sum of squares of sample timings for GetStatistics operations.

GetStatistics_min: Minimum execution time observed for GetStatistics operations.

GetStatistics_max: Maximum execution time observed for GetStatistics operations.

GiveUpCallbacks_ops: Number of GiveUpCallbacks operations executed.

GiveUpCallbacks_ops_ok: Number of successful GiveUpCallbacks operations.

GiveUpCallbacks_sum: Sum of timings for GiveUpCallbacks operations.

GiveUpCallbacks_sqr: Sum of squares of sample timings for GiveUpCallbacks operations.

GiveUpCallbacks_min: Minimum execution time observed for GiveUpCallbacks operations.

GiveUpCallbacks_max: Maximum execution time observed for GiveUpCallbacks operations.

GetVolumeInfo_ops: Number of GetVolumeInfo operations executed.

GetVolumeInfo_ops_ok: Number of successful GetVolumeInfo operations.

GetVolumeInfo_sum: Sum of timings for GetVolumeInfo operations.

GetVolumeInfo_sqr: Sum of squares of sample timings for GetVolumeInfo operations.

GetVolumeInfo_min: Minimum execution time observed for GetVolumeInfo operations.

GetVolumeInfo_max: Maximum execution time observed for GetVolumeInfo operations.

GetVolumeStatus_ops: Number of GetVolumeStatus operations executed.

GetVolumeStatus_ops_ok: Number of successful GetVolumeStatus operations.

GetVolumeStatus_sum: Sum of timings for GetVolumeStatus operations.

GetVolumeStatus_sqr: Sum of squares of sample timings for GetVolumeStatus operations.

GetVolumeStatus_min: Minimum execution time observed for GetVolumeStatus operations.

GetVolumeStatus_max: Maximum execution time observed for GetVolumeStatus operations.

SetVolumeStatus_ops: Number of SetVolumeStatus operations executed.

SetVolumeStatus_ops_ok: Number of successful SetVolumeStatus operations.

SetVolumeStatus_sum: Sum of timings for SetVolumeStatus operations.

SetVolumeStatus_sqr: Sum of squares of sample timings for SetVolumeStatus operations.

SetVolumeStatus_min: Minimum execution time observed for SetVolumeStatus operations.

SetVolumeStatus_max: Maximum execution time observed for SetVolumeStatus operations.

GetRootVolume_ops: Number of GetRootVolume operations executed.

GetRootVolume_ops_ok: Number of successful GetRootVolume operations.

GetRootVolume_sum: Sum of timings for GetRootVolume operations.

GetRootVolume_sqr: Sum of squares of sample timings for GetRootVolume operations.

GetRootVolume_min: Minimum execution time observed for GetRootVolume operations.

GetRootVolume_max: Maximum execution time observed for GetRootVolume operations.

CheckToken_ops: Number of CheckToken operations executed.

CheckToken_ops_ok: Number of successful CheckToken operations.

CheckToken_sum: Sum of timings for CheckToken operations.

CheckToken_sqr: Sum of squares of sample timings for CheckToken operations.

CheckToken_min: Minimum execution time observed for CheckToken operations.

CheckToken_max: Maximum execution time observed for CheckToken operations.

GetTime_ops: Number of GetTime operations executed.

GetTime_ops_ok: Number of successful GetTime operations.

GetTime_sum: Sum of timings for GetTime operations.

GetTime_sqr: Sum of squares of sample timings for GetTime operations.

GetTime_min: Minimum execution time observed for GetTime operations.

GetTime_max: Maximum execution time observed for GetTime operations.

NGetVolumeInfo_ops: Number of NGetVolumeInfo operations executed.

NGetVolumeInfo_ops_ok: Number of successful NGetVolumeInfo operations.

NGetVolumeInfo_sum: Sum of timings for NGetVolumeInfo operations.

NGetVolumeInfo_sqr: Sum of squares of sample timings for NGetVolumeInfo operations.

NGetVolumeInfo_min: Minimum execution time observed for NGetVolumeInfo operations.

NGetVolumeInfo_max: Maximum execution time observed for NGetVolumeInfo operations.

BulkStatus_ops: Number of BulkStatus operations executed.

BulkStatus_ops_ok: Number of successful BulkStatus operations.

BulkStatus_sum: Sum of timings for BulkStatus operations.

BulkStatus_sqr: Sum of squares of sample timings for BulkStatus operations.

BulkStatus_min: Minimum execution time observed for BulkStatus operations.

BulkStatus_max: Maximum execution time observed for BulkStatus operations.

XStatsVersion_ops: Number of XStatsVersion operations executed.

XStatsVersion_ops_ok: Number of successful XStatsVersion operations.

XStatsVersion_sum: Sum of timings for XStatsVersion operations.

XStatsVersion_sqr: Sum of squares of sample timings for XStatsVersion operations.

XStatsVersion_min: Minimum execution time observed for XStatsVersion operations.

XStatsVersion_max: Maximum execution time observed for XStatsVersion operations.

GetXStats_ops: Number of GetXStats operations executed.

GetXStats_ops_ok: Number of successful GetXStats operations.

GetXStats_sum: Sum of timings for GetXStats operations.

GetXstats_sqr: Sum of squares of sample timings for GetXStats operations.

GetXStats_min: Minimum execution time observed for GetXStats operations.

GetXStats_max: Maximum execution time observed for GetXStats operations.

File Server RPC Operation Errors Group (FS_RPCopErrors_group)

FetchData_srv_err: Number of server-down errors during FetchData operations.

FetchData_net_err: Number of network errors during FetchData operations.

FetchData_prot_err_err: Number of protection violations during FetchData operations.

FetchData_vol_err: Number of volume related errors during FetchData operations.

FetchData_busy_err: Number of volume busy conditions during FetchData operations.

FetchData_other_err: Number of miscellaneous other errors during FetchData operations.

FetchACL_srv_err: Number of server-down errors during FetchACL operations.

FetchACL_net_err: Number of network errors during FetchACL operations.

FetchACL_prot_err: Number of protection violations during FetchACL operations.

FetchACL_vol_err: Number of volume related errors during FetchACL operations.

FetchACL_busy_err: Number of volume busy conditions encountered during FetchACL operations.

FetchACL_other_err: Number of miscellaneous other errors during FetchACL operations.

FetchStatus_srv_err: Number of server-down errors during FetchStatus operations.

FetchStatus_net_err: Number of network errors during FetchStatus operations.

FetchStatus_prot_err: Number of protection violations during FetchStatus operations.

FetchStatus_vol_err: Number of volume related errors during FetchStatus operations.

FetchStatus_busy_err: Number of volume busy conditions encountered during FetchStatus operations.

FetchStatus_other_err: Number of miscellaneous other errors during FetchStatus operations.

StoreData_srv_err: Number of server-down errors during StoreData operations.

StoreData_net_err: Number of network errors during StoreData operations.

StoreData_prot_err: Number of protection violations during StoreData operations.

StoreData_vol_err: Number of volume related errors during StoreData operations.

StoreData_busy_err: Number of volume busy conditions encountered during StoreData operations.

StoreData_other_err: Number of miscellaneous other errors during StoreData operations.

StoreACL_srv_err: Number of server-down errors during StoreACL operations.

StoreACL_net_err: Number of network errors during StoreACL operations.

StoreACL_prot_err: Number of protection violations during StoreACL operations.

StoreACL_vol_err: Number of volume related errors during StoreACL operations.

StoreACL_busy_err: Number of volume busy conditions encountered during StoreACL operations.

StoreACL_other_err: Number of miscellaneous other errors during StoreACL operations.

StoreStatus_srv_err: Number of server-down errors during StoreStatus operations.

StoreStatus_net_err: Number of network errors during StoreStatus operations.

StoreStatus_prot_err: Number of protection violations during StoreStatus operations.

StoreStatus_vol_err: Number of volume related errors during StoreStatus operations.

StoreStatus_busy_err: Number of volume busy conditions encountered during StoreStatus operations.

StoreStatus_other_err: Number of miscellaneous other errors during StoreStatus operations.

RemoveFile_srv_err: Number of server-down errors during RemoveFile operations.

RemoveFile_net_err: Number of network errors during RemoveFile operations.

RemoveFile_prot_err: Number of protection violations during RemoveFile operations.

RemoveFile_vol_err: Number of volume related errors during RemoveFile operations.

RemoveFile_busy_err: Number of volume busy conditions encountered during RemoveFile operations.

RemoveFile_other_err: Number of miscellaneous other errors during RemoveFile operations.

CreateFile_srv_err: Number of server-down errors during CreateFile operations.

CreateFile_net_err: Number of network errors during CreateFile operations.

CreateFile_prot_err: Number of protection violations during CreateFile operations.

CreateFile_vol_err: Number of volume related errors during CreateFile operations.

CreateFile_busy_err: Number of volume busy conditions encountered during CreateFile operations.

CreateFile_other_err: Number of miscellaneous other errors during CreateFile operations.

Rename_srv_err: Number of server-down errors during Rename operations.

Rename_net_err: Number of network errors during Rename operations.

Rename_prot_err: Number of protection violations during Rename operations.

Rename_vol_err: Number of volume related errors during Rename operations.

Rename_busy_err: Number of volume busy conditions encountered during Rename operations.

Rename_other_err: Number of miscellaneous other errors during Rename operations.

Symlink_srv_err: Number of server-down errors during Symlink operations.

Symlink_net_err: Number of network errors during Symlink operations.

Symlink_prot_err: Number of protection violations during Symlink operations.

Symlink_vol_err: Number of volume related errors during Symlink operations.

Symlink_busy_err: Number of volume busy conditions encountered during Symlink operations.

Symlink_other_err: Number of miscellaneous other errors during Symlink operations.

Link_srv_err: Number of server-down errors during Link operations.

Link_net_err: Number of network errors during Link operations.

Link_prot_err: Number of protection violations during Link operations.

Link_vol_err: Number of volume related errors during Link operations.

Link_busy_err: Number of volume busy conditions encountered during Link operations.

Link_other_err: Number of miscellaneous other errors during Link operations.

MakeDir_srv_err: Number of server-down errors during MakeDir operations.

MakeDir_net_err: Number of network errors during MakeDir operations.

MakeDir_prot_err: Number of protection violations during MakeDir operations.

MakeDir_vol_err: Number of volume related errors during MakeDir operations.

MakeDir_busy_err: Number of volume busy conditions encountered during MakeDir operations.

MakeDir_other_err: Number of miscellaneous other errors during MakeDir operations.

RemoveDir_srv_err: Number of server-down errors during RemoveDir operations.

RemoveDir_net_err: Number of network errors during RemoveDir operations.

RemoveDir_prot_err: Number of protection violations during RemoveDir operations.

RemoveDir_vol_err: Number of volume related errors during RemoveDir operations.

RemoveDir_busy_err: Number of volume busy conditions encountered during RemoveDir operations.

RemoveDir_other_err: Number of miscellaneous other errors during RemoveDir operations.

SetLock_srv_err: Number of server-down errors during SetLock operations.

SetLock_net_err: Number of network errors during SetLock operations.

SetLock_prot_err: Number of protection violations during SetLock operations.

SetLock_vol_err: Number of volume related errors during SetLock operations.

SetLock_busy_err: Number of volume busy conditions encountered during SetLock operations.

SetLock_other_err: Number of miscellaneous other errors during SetLock operations.

ExtendLock_srv_err: Number of server-down errors during ExtendLock operations.

ExtendLock_net_err: Number of network errors during ExtendLock operations.

ExtendLock_prot_err: Number of protection violations during ExtendLock operations.

ExtendLock_vol_err: Number of volume related errors during ExtendLock operations.

ExtendLock_busy_err: Number of volume busy conditions encountered during ExtendLock operations.

ExtendLock_other_err: Number of miscellaneous other errors during ExtendLock operations.

ReleaseLock_srv_err: Number of server-down errors during ReleaseLock operations.

ReleaseLock_net_err: Number of network errors during ReleaseLock operations.

ReleaseLock_prot_err: Number of protection violations during ReleaseLock operations.

ReleaseLock_vol_err: Number of volume related errors during ReleaseLock operations.

ReleaseLock_busy_err: Number of volume busy conditions encountered during ReleaseLock operations.

ReleaseLock_other_err: Number of miscellaneous other errors during ReleaseLock operations.

GetStatistics_srv_err: Number of server-down errors during GetStatistics operations.

GetStatistics_net_err: Number of network errors during GetStatistics operations.

GetStatistics_prot_err: Number of protection violations during GetStatistics operations.

GetStatistics_vol_err: Number of volume related errors during GetStatistics operations.

GetStatistics_busy_err: Number of volume busy conditions encountered during GetStatistics operations.

GetStatistics_other_err: Number of miscellaneous other errors during GetStatistics operations.

GiveUpCallbacks_srv_err: Number of server-down errors during GiveUpCallbacks operations.

GiveUpCallbacks_net_err: Number of network errors during GiveUpCallbacks operations.

GiveUpCallbacks_prot_err: Number of protection violations during GiveUpCallbacks operations.

GiveUpCallbacks_vol_err: Number of volume related errors during GiveUpCallbacks operations.

GiveUpCallbacks_busy_err: Number of volume busy conditions encountered during GiveUpCallbacks operations.

GiveUpCallbacks_other_err: Number of miscellaneous other errors during GiveUpCallbacks operations.

GetVolumeInfo_srv_err: Number of server-down errors during GetVolumeInfo operations.

GetVolumeInfo_net_err: Number of network errors during GetVolumeInfo operations.

GetVolumeInfo_prot_err: Number of protection violations during GetVolumeInfo operations.

GetVolumeInfo_vol_err: Number of volume related errors during GetVolumeInfo operations.

GetVolumeInfo_busy_err: Number of volume busy conditions encountered during GetVolumeInfo operations.

GetVolumeInfo_other_err: Number of miscellaneous other errors during GetVolumeInfo operations.

GetVolumeStatus_srv_err: Number of server-down errors during GetVolumeStatus operations.

GetVolumeStatus_net_err: Number of network errors during GetVolumeStatus operations.

GetVolumeStatus_prot_err: Number of protection violations during GetVolumeStatus operations.

GetVolumeStatus_vol_err: Number of volume related errors during GetVolumeStatus operations.

GetVolumeStatus_busy_err: Number of volume busy conditions encountered during GetVolumeStatus operations.

GetVolumeStatus_other_err: Number of miscellaneous other errors during GetVolumeStatus operations.

SetVolumeStatus_srv_err : Number of server-down errors during SetVolumeStatus operations.

SetVolumeStatus_net_err: Number of network errors during SetVolumeStatus operations.

SetVolumeStatus_prot_err: Number of protection violations during SetVolumeStatus operations.

SetVolumeStatus_vol_err: Number of volume related errors during SetVolumeStatus operations.

SetVolumeStatus_busy_err: Number of volume busy conditions encountered during SetVolumeStatus operations.

SetVolumeStatus_other_err: Number of miscellaneous other errors during SetVolumeStatus operations.

GetRootVolume_srv_err: Number of server-down errors during GetRootVolume operations.

GetRootVolume_net_err: Number of network errors during GetRootVolume operations.

GetRootVolume_prot_err: Number of protection violations during GetRootVolume operations.

GetRootVolume_vol_err: Number of volume related errors during GetRootVolume operations.

GetRootVolume_busy_err: Number of volume busy conditions encountered during GetRootVolume operations.

GetRootVolume_other_err: Number of miscellaneous other errors during GetRootVolume operations.

CheckToken_srv_err: Number of server-down errors during CheckToken operations.

CheckToken_net_err: Number of network errors during CheckToken operations.

CheckToken_prot_err: Number of protection violations during CheckToken operations.

CheckToken_vol_err: Number of volume related errors during CheckToken operations.

CheckToken_busy_err: Number of volume busy conditions encountered during CheckToken operations.

CheckToken_other_err: Number of miscellaneous other errors during CheckToken operations.

GetTime_srv_err: Number of server-down errors during GetTime operations.

GetTime_net_err: Number of network errors during GetTime operations.

GetTime_prot_err: Number of protection violations during GetTime operations.

GetTime_vol_err: Number of volume related errors during GetTime operations.

GetTime_busy_err: Number of volume busy conditions encountered during GetTime operations.

GetTime_other_err: Number of miscellaneous other errors during GetTime operations.

NGetVolumeInfo_srv_err: Number of server-down errors during NGetVolumeInfo operations.

NGetVolumeInfo_net_err: Number of network errors during NGetVolumeInfo operations.

NGetVolumeInfo_prot_err: Number of protection violations during NGetVolumeInfo operations.

NGetVolumeInfo_vol_err: Number of volume related errors during NGetVolumeInfo operations.

NGetVolumeInfo_busy_err: Number of volume busy conditions encountered during NGetVolumeInfo operations.

NGetVolumeInfo_other_err: Number of miscellaneous other errors during NGetVolumeInfo operations.

BulkStatus_srv_err: Number of server-down errors during BulkStatus operations.

BulkStatus_net_err: Number of network errors during BulkStatus operations.

BulkStatus_prot_err: Number of protection violations during BulkStatus operations.

BulkStatus_vol_err: Number of volume related errors during BulkStatus operations.

BulkStatus_busy_err: Number of volume busy conditions encountered during BulkStatus operations.

BulkStatus_other_err: Number of miscellaneous other errors during BulkStatus operations.

XStatsVersion_srv_err: Number of server-down errors during XStatsVersion operations.

XStatsVersion_net_err: Number of network errors during XStatsVersion operations.

XStatsVersion_prot_err: Number of protection violations during XStatsVersion operations.

XStatsVersion_vol_err: Number of volume related errors during XStatsVersion operations.

XStatsVersion_busy_err: Number of volume busy conditions encountered during XStatsVersion operations.

XStatsVersion_other_err: Number of miscellaneous other errors during XStatsVersion operations.

GetXStats_srv_err: Number of server-down errors during GetXStats operations.

GetXStats_net_err: Number of network errors during GetXStats operations.

GetXStats_prot_err: Number of protection violations during GetXStats operations.

GetXStats_vol_err: Number of volume related errors during GetXStats operations.

GetXStats_busy_err: Number of volume busy conditions encountered during GetXStats operations.

GetXStats_other_err: Number of miscellaneous other errors during GetXStats operations.

File Server RPC Transfer Timings Group (FS_RPCopBytes_group)

FetchData_xfers: Number of FetchData operations.

FetchData_xfers_ok: Number of successful FetchData operations.

FetchData_xfers_sum: Sum of timing values for FetchData operations.

FetchData_xfers_sqr: Sum of squares of sample timings for FetchData operations.

FetchData_xfers_min: Minimum transfer time observed for FetchData operations.

FetchData_xfers_max: Maximum transfer time observed for FetchData operations.

FetchData_xfers_bytes_sum: Sum of bytes transferred for FetchData operations.

FetchData_xfers_bytes_min: Minimum byte transfer observed for FetchData operations.

FetchData_xfers_bytes_max: Maximum byte transfer observed for FetchData operations.

FetchData_xfers_bucket0: Tally in bucket0 for FetchData operations.

FetchData_xfers_bucket1: Tally in bucket1 for FetchData operations.

FetchData_xfers_bucket2: Tally in bucket2 for FetchData operations.

FetchData_xfers_bucket3: Tally in bucket3 for FetchData operations.

FetchData_xfers_bucket4: Tally in bucket4 for FetchData operations.

FetchData_xfers_bucket5: Tally in bucket5 for FetchData operations.

FetchData_xfers_bucket6: Tally in bucket6 for FetchData operations.

FetchData_xfers_bucket7: Tally in bucket7 for FetchData operations.

FetchData_xfers_bucket8: Tally in bucket8 for FetchData operations.

StoreData_xfers: Number of StoreData operations.

StoreData_xfers_ok: Number of successful StoreData operations.

StoreData_xfers_sum: Sum of timing values for StoreData operations.

StoreData_xfers_sqr: Sum of squares of sample timings for StoreData operations.

StoreData_xfers_min: Minimum transfer time observed for StoreData operations.

StoreData_xfers_max: Maximum transfer time observed for StoreData operations.

StoreData_xfers_bytes_sum: Sum of bytes transferred for StoreData operations.

StoreData_xfers_bytes_min: Minimum byte transfer observed for StoreData operations.

StoreData_xfers_bytes_max: Maximum byte transfer observed for StoreData operations.

StoreData_xfers_bucket0: Tally in bucket0 for StoreData operations.

StoreData_xfers_bucket1: Tally in bucket1 for StoreData operations.

StoreData_xfers_bucket2: Tally in bucket2 for StoreData operations.

StoreData_xfers_bucket3: Tally in bucket3 for StoreData operations.

StoreData_xfers_bucket4: Tally in bucket4 for StoreData operations.

StoreData_xfers_bucket5: Tally in bucket5 for StoreData operations.

StoreData_xfers_bucket6: Tally in bucket6 for StoreData operations.

StoreData_xfers_bucket7: Tally in bucket7 for StoreData operations.

StoreData_xfers_bucket8: Tally in bucket8 for StoreData operations.

Cache Manager RPC Operation Timings Group (CM_RPCopTimes_group)

CallBack_ops: Number of CallBack operations executed.

CallBack_ops_ok: Number of successful CallBack operations.

CallBack_ops_sum: Sum of timings for CallBack operations.

CallBack_ops_min: Minimum execution time observed for CallBack operations.

CallBack_ops_max: Maximum execution time observed for CallBack operations.

CallBack_ops_sqr: Sum of the square of CallBack operations executed.

InitCallBackState_ops: Number of InitCallBackState operations executed.

InitCallBackState_ops_ok: Number of successful InitCallBackState operations.

InitCallBackState_ops_sum: Sum of timings for InitCallBackState operations.

InitCallBackState_ops_min: Minimum execution time observed for InitCallBackState operations.

InitCallBackState_ops_max: Maximum execution time observed for InitCallBackState operations.

InitCallBackState_ops_sqr: Sum of squares of timings for InitCallBackState operations.

Probe_ops: Number of Probe operations executed.

Probe_ops_ok: Number of successful Probe operations.

Probe_ops_sum: Sum of timings for Probe operations.

Probe_ops_min: Minimum execution time observed for Probe operations.

Probe_ops_max: Maximum execution time observed for Probe operations.

Probe_ops_sqr: Sum of squares of timings for Probe operations.

GetLock_ops: Number of GetLock operations executed.

GetLock_ops_ok: Number of successful GetLock operations.

GetLock_ops_sum: Sum of timings for GetLock operations.

GetLock_ops_min: Minimum execution time observed for GetLock operations.

GetLock_ops_max: Maximum execution time observed for GetLock operations.

GetLock_ops_sqr: Sum of squares of timings for GetLock operations.

GetCE_ops: Number of GetCE operations executed.

GetCE_ops_ok: Number of successful GetCE operations.

GetCE_ops_sum: Sum of timings for GetCE operations.

GetCE_ops_min: Minimum execution time observed for GetCE operations.

GetCE_ops_max: Maximum execution time observed for GetCE operations.

GetCE_ops_sqr: Sum of squares of timings for GetCE operations.

XStatsVersion_CM_ops: Number of XStatsVersion operations executed.

XStatsVersion_CM_ops_ok: Number of successful XStatsVersion operations.

XStatsVersion_CM_ops_sum: Sum of timings for XStatsVersion operations.

XStatsVersion_CM_ops_min: Minimum execution time observed for XStatsVersion operations.

XStatsVersion_CM_ops_max: Maximum execution time observed for XStatsVersion operations.

XStatsVersion_CM_ops_sqr: Sum of squares of timings for XStatsVersion operations.

GetXStats_CM_ops: Number of GetXStats operations executed.

GetXStats_CM_ops_ok: Number of successful GetXStats operations.

GetXStats_CM_ops_sum: Sum of timings for GetXStats operations.

GetXStats_CM_ops_min: Minimum execution time observed for GetXStats operations.

GetXStats_CM_ops_max: Maximum execution time observed for GetXStats operations.

GetXStats_CM_ops_sqr: Sum of squares of timings for GetXStats operations.

Authentication Information for Cache Manager Group (Auth_Stats_group)

curr_PAGs: Current number of PAGs.

curr_Records: Current number of records in table.

curr_AuthRecords: Current number of of authenticated records (with valid ticket).

curr_UnauthRecords: Current number of of unauthenticated records (without any ticket at all).

curr_MaxRecordsInPAG: Maximum records for a single PAG.

curr_LongestChain: Length of longest current hash chain.

PAGCreations: Number of PAG creations.

TicketUpdates: Number of ticket additions/refreshes.

HWM_PAGS: High water mark - number of PAGs.

HWM_Records: High water mark - number of records.

HWM_MaxRecordsInPAG: High water mark - maximum records for a single PAG.

HWM_LongestChain: High water mark - longest hash chain.

Unreplicated File Access Group (Access_Stats_group)

unreplicatedRefs: Number of references to unreplicated data.

replicatedRefs: Number of references to replicated data.

numReplicasAccessed: Number of replicas accessed.

maxReplicasPerRef: Maximum number of replicas accessed per reference.

refFirstReplicaOK: Number of references satisfied by 1st replica.